Overfill of any container is
a potential hazard! Petroleum tanks, solvent farm tanks, LPG tanks, underground
tanks, or even flowing solid filled silos do have a possibility of overfilling
an outflow of stored material. Hence, they need to be monitored & controlled
to prevent overfill and the subsequent loss. Besides, if the medium in question
is flammable, it can cause severe damages to physical assets, environment and
human beings. Prevention of such an occurrence can be achieved through overfill
control along with savings in cleanup cost and downtime.
The quiddity of
safe-handling fluid contents–both hazardous and inflammable–lies in the use of
the right kind of level gauge. That would prevent from the tank to overfill,
which in turn can keep everyone around safe and sound! Technology has evolved
with time. Safety measures getting increasingly important and stringent, the
industries have to keep themselves abreast of state-of-the-art gauging systems.
Overfill prevention can
be accomplished by employing Techtrol level measuring instruments to control
inlet flow into the tanks when the material level has reached high level. Pune
Techtrol offers cost-effective, easy to install & maintenance free
instruments which provide long durability and come with wide choice of
materials to suit various services.
Level switches are installed
on tank at high-level preset point, to detect presence of material and actuates
auxiliary device to stop inlet flow.
Level transmitters are
installed on tank to provide continuous level indication of material in the
tank from bottom to top through a generated signal of 4-20mA at preset level.
At preset level, a signal is transmitted to actuate auxiliary device and stop
inlet flow.
Float Guided Switch is a top
mounted switch based on Archimedes principle of floating body. The float actuates a switch magnetically at a
preset level point of liquids. It is available for single or multiple switching
up to four levels.
Techtrol Bilge Switch is a
miniature float switch mounted inside a perforated cage to prevent suspended
particles from hindering the float movement in liquids. It is provided with an
extension cable of required length to detect corresponding preset level in
bilge tanks on ships. It is IRS class approved for marine applications and
suitable for single switching.
Float Pivoted Switch is a
side mounted switch for single switching, based on Archimedes principle of
floating body in liquids. The float magnetically actuates a switch at preset
level.
Displacer Switch is top
mounted switch based on Archimedes principle of submerged body in liquids. The switch is magnetically actuated due to
upward buoyant force exerted by the displacer at preset level. It is top
mounted and available for single or multiple switching.
Capacitance Switch is based
on the principle of capacitance formed by the liquid between two electrodes at
preset level. It is top mounted and available with site adjustable single or
multiple switching.
Vibrating Fork Switch is
made to vibrate through by powering piezo electric crystal. The vibrations are
dampened when it comes in contact with material at preset level which in turn
effect a change over in contacts for control action. These are point level switches for liquid as
well as free flowing solid. They can be top or side mounted angularly.
Rotary Paddle Switch is
based on a low speed synchronous motor rotating a paddle. The rotary motion is
stopped on coming in contact with free flowing solids, which in turn effect a
change over in contacts for control action. These are point level switches for
free flowing solid and can be top or side mounted angularly.
Float Guided Transmitter is
based on change in resistance output caused by magnetic actuation of reed contacts by the float movement in liquid
to provide 4-20mA output for monitoring and control action.
Hydrostatic Transmitter is
based on hydrostatic pressure of liquid level to provide 4-20mA output. It is
available in two versions. One is top mounted and submerged into liquid and
other is side mounted externally to the tank wall.
Ultrasonic Transmitter is
top mounted, does not come in contact with service medium and provides
continuous output for control action. It
works on ‘Time of Flight ‘principle using the speed of sound.
Guided Wave Radar is top
mounted and provides continuous output for control action. It works on ‘Time of
Flight’ principle using electromagnetic pulses transmitted along the guide rod.
Radar Transmitter is top
mounted, does not come in contact with service medium and provides continuous
output for control action. It works on
periodic linear frequency variation of transmitted electromagnetic signal which
is reflected on measuring surface received with time delay. Difference in
transmitted frequency &received frequency is proportional to liquid level.
About Us
Pune
Techtrol Pvt. Ltd. has evolved from a six employee enterprise, in 1984 to
become a premier Indian company recognized for quality level
measurement and process automation systems for
liquids & solids. We are an ISO 9001 2008 Company located in the Industrial
belt of Pune, around 180 kms from Mumbai, the commercial capital of India. Pune
is famous globally for quality instrumentation industries with ample skilled
& talented work force. ‘Techtrol’ is recognized as most reliable &
trusted brand, delivering quality products unsurpassed in terms of accuracy,
workmanship, performance, safety & ease of installation, providing long
uninterrupted service in wide & varied industrial applications. Our
products are designed & engineered for optimal performance and with
practical experience gained over last several years has equipped us, to meet
the most demanding user requirements.
Our
technical support to customer starts from the enquiry stage, through proper
selection & guidance, right up to supervision of installation &
calibration at site. This is accomplished through large network of experienced
representatives & distributors backed by our team of enterprising sales
& service engineers.
Our people
are our strength and as such our prime philosophy is to respect them as
individuals with inherent skills, to be channelized to create value for our
society & country. We believe that, our reputation and our product quality
& services are a result of their team work and as such, it has been our
endeavour to train them continuously for higher multi-skills and better
understanding of our products & customer expectations of us.
Contact Us
Pune
Techtrol Pvt.Ltd
S-18, MIDC
Bhosari,
Pune -
411026,India
Phone
No- 020 66342900
Email
Id- ho@punetechtrol.com
Website- http://www.punetechtrol.com
No comments:
Post a Comment